Deutsch 
English 
UV sensor made of PTFE with 1/4-inch screw-in thread
and communication via RS485 (Modbus/ZCON)
for monitoring UV lamps in treatment and disinfection systems
Adjusted sensor for detecting UV irradiance as absolute value
Processing via PLC or ZED UV Monitor in “W/m²”, “mW/cm²” or in “%”
Features
- available for low-pressure and medium-pressure applications
- measuring range for low pressure: 2...500W/m²
- measuring range for medium pressure: 20...3000W/m²
- precise detection of UVC irradiance over the entire specified measuring range - other measuring ranges can also be realized on request
- Multi-sensoring - parallel operation of the sensors on the common RS485 bus
Technical Specification
| supply voltage: | 12...24V DC |
|---|---|
| sensitive element: | silicon carbide diode (SiC) |
| spectral range: | 210 - 380nm (220 - 290nm with UVC filter on request) |
| operation temperatur: | 0 - 60°C (32 - 140°F) |
| max. pressure / IP code: | 10bar at front / IP64 on terminal ends if connected to appropriate sensor cable |
| body material: | PTFE |
| mounting: | pipe thread ISO228 G¼ (use MF001-A to adapt to G1) |
| wiring: | ready-to-use ZED sensor cables available in several lengths |
Display Units & Accessories
- ZED UV Monitors
- UV Monitor PRO11
- UV Monitor PRO16
- UV Monitor PRO30D
- Control units
- ZCONmini II
- via RS485/ModBus RTU: PLC or PC
- Accessories
- Measurement Window Adapter MF001-A
- Sensor PC-Software
- ZED Sensor Configurator
- ZED Radiometer
- SmartMeter
- TinyMeter
