for analog and digital ZED UV-sensors
Features
- for use as UV-C monitoring system
(displaying UV values in "W/m²", mW/cm²" or "%") - can be connected with
- up to two D-SiC UV-sensors with digital interface
- or one D-SiC-I UV-sensor with 4-20mA signal output - hour counter for operation hours and lamp replacement indication
- switchcycle counter
- system status indication:
- multicolor 2-line LCD
- green, red and yellow LCD backlight - system status forwarding:
- potential free relay contacts (UV alarm, UV warning)
- UV value forwarding to PLC via 4-20 mA signal
- remote input "UV-off" for pausing UV detection
- remote input "lamp fault" for ballasts fault contacts - ready for certification according to DVGW W294 and ÖNORM M5873
Technical Specification
supply voltage: | 230V AC ± 10% /45-65Hz (115V AC and 24V DC on request) |
---|---|
operation temperature: | max. 45°C (113°F) |
ambient temperature: | 0 - 40°C (32 - 104°F) |
IP code: | IP20 (IP65 at front on request) |
mounting: | to be installed in the front panel of a cabinet or console (DIN43700 cut-out) |
dimensions (LxWxD): | 96 x 48 x 114 mm (3,77 x 1,89 x 4,48 Zoll) |
ZED UV Sensors
- ...with digital interface
- ...with 4-20 mA interface
- ... with photodiode signal
Control Units
- via 4-20 mA signal output
- via relay contacts