Deutsch 
English 
ballast with parameter adjustment and remote control for four 4-pin UV-lamps, lamp power up to 325W
lamp ower: up to 325 W
lamp current: up to 2,2 A
Features
- preheat start ballasts for optimal lamp operation with adjustable operation parameters
- fourfold device - powers four lamps, independent lamp operation even if one lamp is defective or disconnected
- adjustable preheat and operation parameters settings for use in different environmental conditions
- controllable via PLC or ZED ZCON control units, allows dimming, using remote mode the status relay wiring can be omitted
- lamp and ballast status indication
- green, red and yellow LEDs
- ModBus/ZCON status request
- optional: potential free relay contacts - up to 30 m cable length possible
- local operation and digital remote control
- lamp operation control via RS485 using ModBus or ZCON protocol, optional:
- ethernet interface
- dimming using analog 4...20mA/0...10V interface - metal housing, designed for optimal thermal flow
- push-in contacts for quick installation
- enhanced protection
- power range control
- undervoltage protection
- overtemperature protection - high efficiency
- active power factor correction (PFC)
low THD according to EN 61000
Technical Specification
| supply voltage: | 230V AC ± 10% /45-65Hz (115V AC types on request) |
|---|---|
| efficiency: | >90% |
| operation temperature: | max. 50°C (122°F) at TC-point (ballasts are overtemperature protected) |
| ambient temperature: | 0 - 40°C (32 - 104°F) |
| IP code: | IP20 |
| dimensions (LxWxD): | 269 x 317 x 83 mm (10.57 x 12.46 x 3.27 inch) |
UV lamp types
- GIA1554T5LCA
- GIA1554T6LCA
- GIA1554T6LCA/320
- GPHA1554T5L
- GPHA1554T6L
- GPHHA1554T6L
- GPHHA1000T6L
- NNI 300/147 XL
- NIQ 290/155 XL
- NIQ 300/147 XL
- TUV 325W XPT
(ballasts for other UV lamp types available on request)
ZED Control Units
- ZCONmini
- ZCONdin
- ZCONnano
- ZCONsub
