Deutsch 
English 
ballast with parameter adjustment and remote control for two 4-pin UV-lamps, lamp power up to 350W
lamp power: up to 350 W
lamp current: up to 3,0 A
Features
- preheat start ballasts for optimal lamp operation with adjustable operation parameters
- double device - powers two lamps, independent lamp operation even if one lamp is defective or disconnected
- adjustable preheat and operation parameter settings for use in different environmental conditions
- controllable via PLC or ZED ZCON control units, allows dimming, using remote mode the status relay wiring can be omitted
- lamp and ballast status indication
- green, red and yellow LEDs
- potential free relay contacts
- ModBus/ZCON status request - up to 30 m lamp cable length possible
- local operation and digital remote control
- lamp operation control via RS485 using ModBus or ZCON protocol
- metal housing, designed for optimal thermal flow
- push-in contacts for quick installation
- enhanced protection
- power range control
- undervoltage protection
- overtemperature protection - high efficency
- active power factor correction (PFC)
low THD according to EN 61000
Technical Specification
| supply voltage: | 230V AC ± 10% /45-65Hz (115V AC types on request) |
|---|---|
| efficiency: | >90% |
| operation temperature: | max. 50°C (122°F) at TC-point (ballasts are overtemperature protected) |
| ambient temperature: | 0 - 40°C (32 - 104°F) |
| IP code: | IP20 |
| dimensions (LxWxD): | 248 x 150 x 59 mm (9.76 x 5.89 x 2.32 inch) |
UV lamp types
- GIA1554T5LCA
- GIA1554T6LCA
- GIA1554T6LCA/320
- GPHA1554T5L
- GPHA1554T6L
- GPHHA1554T6L
- GPHHA1000T6L
- NNI 300/147 XL
- NIQ 290/155 XL
- NIQ 300/147 XL
- TUV 325W XPT
(ballasts for other UV lamp types available on request)
ZED control units
- ZCONmin
- ZCONdin
- ZCONnano
- ZCONsub
