Deutsch 
English 
all-in-one complete system
total lamp power: 600 W
Features
- plug & play electronic boards for operating UV-C lamps Modula 1x600W Modula 2x300W Modula 3x200W
- system of modular electronic units for operating 1, 2 or 3 UV-C lamps with total power 600W
- combination of control- and monitoring features
- numerous sensor interfaces and configurable signal outputs are available
- easy installation in IP65/67 cabinets
- no air inlets/outlets are necessary
- mains switch, interlock or remote switches can be connected directly
- lamp/ballast operation control -l amp operation parameter adjustable - lamp dimming - inrush current limitation - lamp cable length up to 30m
- UV-C and temperature monitoring - digital UV / temperature sensors - UV photodiode sensor - KTY type temperature sensor
- remote status monitoring via RS485/ModBus RTU
- 4 relay contacts
- 4-20mA signal input/output
Technical Specification
| supply voltage: | 230V AC ± 10% /45-65Hz |
|---|---|
| efficiency: | >90% |
| operation temperature: | internal temperature monitor, overheating protection |
| ambient temperature: | 0 - 40°C (32 - 104°F) |
| IP code: | IP00 to be installed in a closed cabinet |
| dimensions (LxWxD): | base unit with mounting frame: 300 x 250 x 84 mm (11.81 x 9.84 x 3.31 inch) |
UV lamp types
- lamp power 1x 100W...600W
- lamp power 2x 100W...300W
- lamp power 3x 100W...200W
ZED Sensors
- all types with
- digital interface
- lateral Uv detection
- photodioden signal
