Deutsch 
English 
standard ballasts for four 2-pin UV-lamps, lamp power up to 160W
lamp power: up to 160 W
lamp current: up to 1,0 A
Features
- instant start ballasts for 2-pin UV-lamps
- less wiring - only 2 wires per lamp
- fourfold device - powers four lamps, independent lamp operation even if one lamp defective or disconnected
- standard operation
- easy system start-up "plug and play"
- no DIP-switch / no RS485 interface
- no adjustable operation parameters
- no remote operation control - metal housing, designed for optimal thermal flow
- push-in contacts for quick installation
- lamp and ballast status indication:
- red LEDs, connectors for external green LEDs
- potential free relay contacts - high efficiency
- active power factor correction (PFC)
low THD according to EN 61000
Technical Specification
| supply voltage: | 230V AC ± 10% / 45-65Hz (115V AC types on request) |
|---|---|
| efficiency: | >90% |
| operation temperature: | max. 50°C (122°F) at TC-point |
| ambient temperature: | 0 - 40°C (32 - 104°F) |
| IP code: | IP20 |
| dimensions (LxWxD): | 248 x 150 x 59 mm (9.76 x 5.89 x 2.32 inch) |
UV lamp types
- GHO64T5
- TUV 64T5 HO
(ballasts for other UV lamp types available on request)
