Products

Specify Selection

  • Hide Filters
  • Show Filters

Specify Selection

  • Hide Filters
  • Show Filters

ballast with parameter adjustment and remote control for 4-pin UV-lamps, lamp power up to 1200W

lamp power: up to 1200 W

lamp current: up to 10,0 A

Features

  • preheat start ballasts for optimal lamp operation with adjustable operation parameters
  • single device - powers one lamp
  • adjustable preheat and operation parameters settings for use in different environmental conditions
  • controllable via PLC or ZED ZCON control units, allows dimming, using remote mode the status relay wiring can be omitted
  • lamp and ballast status indication
    - green, red and yellow LEDs
    - ModBus/ZCON status request
    - optional: potential free relay contacts
  • up to 30 m lamp cable length possible
  • local operation and digital remote control
  • lamp operation control via RS485 using ModBus or ZCON protocol, optional:
    - ethernet interface
    - dimming using analog 4...20mA/0...10V interface
  • metal housing, designed for optimal thermal flow
  • enhanced protection
    - power range control
    - undervoltage protection
    - overtemperature protection
  • high efficiency
  • active power factor correction (PFC)
    low THD according to EN 61000

Technical Specification

supply voltage: 230 V AC ± 10% / 45-65 Hz (115 V AC types on request)
efficiency: > 90%
operation temperature: max. 50 ° C (122 ° F) at TC-point (ballasts are overtemerature protected)
ambient temperature: 0 - 40 ° C (32-104 ° F)
IP code: IP20
dimensions (LxWxD): 269 ​​x 317 x 83 mm (10,57 x 12,46 x 3,27 inch)

UV lamp types

  • GPHHA1554T10L
  • NNI 600/147 XL
  • NNI 800/147 XL
  • NNI 1000/180 XL
  • TUV 800W XPT

(ballasts for other UV lamp types available on request)

ZED Control Units

  • ZCONmini
  • ZCONdin
  • ZCONnano


Products