Deutsch 
English 
ballast with parameter adjustment and remote control for 4-pin UV-lamps, lamp power up to 400W
lamp power: up to 400 W
lamp current: up to 4,8 A
Features
- preheat start ballasts for optimal lamp operation with adjustable operation pararmeters
- single device - powers one lamp
- adjustable preheat and operation parameter settings for use in differenr environmental conditions
- controllable via PLC or ZED ZCON control units , allows dimming, using remote mode the status relay wiring can be omitted
- lamp and ballast status indication - green, red and yellow LEDs - potential free relay contacts
- up to 30 m lamp cable length possible
- local operation and digital remote control
- lamp operation control via RS485 using ModBus or ZCON protocol
- rack mounting ballasts - less space for more ballasts - push-in cards for quick servicing
- enhanced protection - power range control - undervoltage protection - overtemperature protection
- high efficiency
- active power factor correction (PFC) low THD according to EN 61000
Technical Specification
| supply voltage: | 230V AC ± 10% /45-65Hz (115V AC types on request) |
|---|---|
| efficiency: | >90% |
| operation temperature: | max. 50°C (122°F) at TC-point (ballasts are overtemperature protected) |
| ambient temperature: | 0 - 40°C (32 - 104°F) |
| IP code: | IP00 |
| dimensions (LxWxD): | 220 x 143,5 x 60 mm (8,66 x 5,65 x 2,36 inch) |
UV lamp types
- GIA1554T5LCA
- GIA1554T6LCA
- GIA1554T6LCA/320
- GPHA843T5L
- GPHA843T6L
- GPHA1000T5L
- GPHA1000T6L
- GPHA1554T5L
- GPHA1554T6L
- GPHHA843T6L
- GPHHA1554T6L
- GPHHA1000T6L
- NNI 120/84 XL
- NNI 200/107
- NNI 201/107 XL
- NIQ 200/107
- NIQ 201/107 XL
- NNI 300/147 XL
- NIQ 290/155 XL
- NIQ 300/147 XL
- NNI 400/147 XL
- TUV 200W XPT
- TUV 260W XPT
- TUV 325W XPT
- TUV 330W XPT
(ballasts for other UV lamp types available on request)
ZED Control Units
- ZCONmini
- ZCONdin
- ZCONnano
- ZCONsub
