Deutsch 
English 
ballast with parameter adjustment and remote control for 4-pin UV-lamps, lamp power up to 400W
lamp power: up to 400W
lamp current: up to 4.8A
Features
- preheat start ballasts for optimal lamp operation with adjustable operation parameters
- single device - powers one lamp
- adjustable preheat and operation parameter settings for use in different environmental conditions
- controllable via PLC or ZED ZCON control units, allows dimming, using remote mode the status relay wiring can be omitted
- lamp and ballast status indication
- green, red and yellow LEDs
- potential free relay contacts
- ModBus/ZCON status request - up to 30 m lamp cable length possible
- local operation and digital remote control
- lamp operation control via RS485 using ModBus or ZCON protocol
- metal housing, designed for optimal thermal flow
- push-in contacts for quick installation
- enhanced protection
- power range control
- undervoltage protection
- overtemperature protection - high efficiency
- active power factor correction (PFC)
low THD according to EN 61000
Technical Specification
| supply voltage: | 230V AC ± 10% /45-65Hz (115V AC types on request) |
|---|---|
| efficiency: | >90% |
| operation temperature: | max. 50°C (122°F) at TC-point (ballasts are overtemperature protected) |
| ambient temperature: | 0 - 40°C (32 - 104°F) |
| IP code: | IP20 |
| dimensions (LxWxD): | 248 x 105 x 59 mm (9.76 x 4.13 x 2.32 inch) |
UV lamp types
- GIA1554T5LCA
- GIA1554T6LCA
- GIA1554T6LCA/320
- GPHA843T5L
- GPHA843T6L
- GPHA1000T5L
- GPHA1000T6L
- GPHA1554T5L
- GPHA1554T6L
- GPHHA843T6L
- GPHHA1554T6L
- GPHHA1000T6L
- NNI 120/84 XL
- NNI 200/107
- NNI 201/107 XL
- NIQ 200/107
- NIQ 201/107 XL
- NNI 300/147 XL
- NIQ 290/155 XL
- NIQ 300/147 XL
- NNI 400/147 XL
- TUV 200W XPT
- TUV 260W XPT
- TUV 325W XPT
- TUV 330W XPT
* forced ballast cooling required
(ballasts for other UV lamp types available on request)
ZED Control units
- ZCON mini
- ZCON nano
- PLC via Modbus
