Deutsch 
English 
analog 1/4-inch UV sensor
Features
- sensors are intended for monitoring UV lamps in water/air purification and disinfection systems
- for detecting absolute UV irradiance values
- UV values are indicated in "W/m²", "mW/cm²" or "%"
- UV values are indicated in "W/m²", "mW/cm²" or "%" with the appropriate UV-monitor via 4-20mA, 0-2V or 0-10V interface
- sensors incorporate internal digital signal processing and an integrated signal converter for the appropriate analog industrial interface for optimal operation with analog PLC
- all digital UV-sensors are adjusted to cover the complete specified measurement range
- low pressure types: range 2...500W/m²
- medium pressure types: range 20...3000W/m²
- customized ranges are available on request- customer specific adjustment:
The analog signal output is preset according to customers specification (e.g. 7W/m² ≙ 10V) - customer specific adjustment:
The analog signal output is preset according to customers specification (e.g. 7W/m² ≙ 10V)
Technical Specification
| supply voltage: | 12...24V DC |
|---|---|
| sensitive element: | silicon carbide diode (SiC) |
| spectral range: | 210 - 380nm (220 - 290nm with UVC filter on request) |
| operation temperatur: | 0 - 60°C (32 - 140°F) |
| max. pressure / IP code: | 10bar at front / IP64 on terminal ends if connected to appropriate sensor cable |
| body material: | stainless steel 1.4404 |
| mounting: | pipe thread ISO228 G¼ (use MF001-A to adapt to G1) |
| wiring: | ready-to-use ZED sensor cables available in several lengths |
