UV sensor with 3/4-inch screw-in thread and analog signal interface
for monitoring UV lamps in treatment and disinfection systems
Calibrated sensor for detecting the UV irradiance as absolute value
Processing via PLC or ZED UV Monitor in “W/m²”, “mW/cm²” or in “%”
Features
- customer specific adjustment: The analog signal output is preset according to customers specification (e.g. 75W/m² ≙ 10V)
- available for low pressure and medium pressure applications
- measuring range for low pressure: 2...500W/m²
- measuring range for medium pressure: 20...3000W/m²
- precise detection of UVC irradiance over the entire specified measuring range - other measuring ranges can also be realized on request
- current or voltage interface - sensors incorporate internal digital signal processing and an integrated signal converter for the appropriate analog industrial interface for optimal operation with analog PLC
- customization by customer: adjustment value can be adapted via ZED SmartMeter or Sensor Configurator PC software
Technical Specification
supply voltage: | 12...24V DC |
---|---|
sensitive element: | silicon carbide diode (SiC) |
spectral range: | 210 - 380nm (220 - 290nm with UVC filter on request) |
operation temperatur: | 0 - 60°C (32 - 140°F) |
max. pressure / IP code: | 10bar at front / IP64 on terminal ends if connected to appropriate sensor cable |
body material: | stainless steel 1.4404 |
mounting: | pipe thread ISO228 G¾ |
wiring: | ready-to-use ZED sensor cables available in several lengths |
Display Units & Accessories
- ZED UV Monitors
- UV Monitor PRO11
- UV Monitor PRO16
- Radiometer
- SmartMeter
- Sensor PC-Software
- ZED Sensor Configurator